When performing a cylinder leakage test, the following statements are all correct EXCEPT ________

A) Air heard escaping through the tailpipe may indicate a defective exhaust valve
B) Bubbles in the coolant may indicate a defective head gasket
C) Shop air should be applied to the dipstick tube
D) Shop air should be applied through the spark plug hole


C

Trades & Technology

You might also like to view...

PROBLEM 2.27 Each of the links AB and CD is made of steel (E = 29 ? 106 psi) and has a uniform rectangular cross section of ? 1 in. Knowing that they support rigid member BCE, determine the largest load that can be suspended from point E if the deflection of E is not to exceed 0.01 in.

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. Almost all power supplies are shipped from the manufacturer with the voltage setting in the HIGH voltage (240 V) position. 2. The first step in the start-up procedure is to check all power and communication cables to ensure that the connector pins are straight, and not bent or pulled out. 3. Each time an input device is closed, the corresponding LED on the input module should illuminate. 4. There are three methods used to test output devices. 5. The electrician and/or technician should be aware of how the system normally functions if he or she expects to successfully troubleshoot the system.

Trades & Technology

To two decimal places, the volume of a right circular cone with a base area of 0.500 square inch and a height of 1.140 inches is ____________________ cubic inches.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Massachusetts is among the states leading sheep production

Indicate whether the statement is true or false

Trades & Technology