Given the following example of an SAE spline specification, identify the components A through D.SAE 2 1/2-10 B SPLINE(A) = SAE(B) = 2 1/2(C) = 10(D) = B
What will be an ideal response?
The note components are described as follows:
(A) Society of Automotive Engineers.
(B) The outside diameter of the spline.
(C) The number of teeth.
(D) A = a fixed nonsliding spline.
B = spline slides under no-load conditions.
C = spline slides under load conditions.
You might also like to view...
Some older drums and disc brake rotors are fastened tight to the hub. The studs are ____________________, which means that they are deformed to keep them tight.
Fill in the blank(s) with the appropriate word(s).
When a battery will not accept a charge, it is MOST-Likely:
A. dry B. fully charged C. sulfated D. corroded
All circuit breakers must be designed so that any fault must be cleared before the circuit breaker can be ____________________.
Fill in the blank(s) with the appropriate word(s).
How do infrared heaters transfer heat?
A) Air is circulated over them and distributed via ductwork B) They heat the air molecules and the air heats the people in the room C) They directly heat people and objects through rays D) They only heat objects that they are touching