When a pressure transducer is connected to the bottom of a vessel for the purpose of measuring level, what is the actual variable being measured?
A. level, directly
B. differential pressure
C. hydrostatic head pressure
D. volume
Answer: C
You might also like to view...
A job that is known to frequently result in incidents and injuries should be _____.
a. given a low JSA priority b. eliminated immediately c. the subject of a JSA d. completely restructured
The diesel cycle efficiency is nearest:
The pressure and temperature at the inlet to an ideal diesel cycle, with P-v diagram shown, are 100 kPa and 10ºC. It has a compression ratio of 18 and a cut-off ratio of 2. The maximum temperature in the cycle is 1400ºC. Assume constant
specific heats from Table below for all calculations.
A) 49%
B) 54%
C) 58%
D) 63%
When the tip moves on a .200 inch diameter edge finder, how far is the spindle center line from the workpiece?
A) .100 in. B) .200 in. C) .300 in. D) .400 in.
How can noise enter a circuit?
A) through the power supply B) from within the circuit C) fluorescent lighting D) all of the above