Which of the following locations will generally be lowest cost for locating a generator?
A) Installing in the basement.
B) Installing in a roof penthouse.
C) Housing in a dedicated, separate enclosure adjacent to the main building.
C) Housing in a dedicated, separate enclosure adjacent to the main building.
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. Alternating current travels in three directions in a circuit. 2. The purpose of overcurrent protection is to open a circuit if the temperature in the wiring or equipment rises to an excessive or dangerous level. 3. A fuel cell is like a battery except, rather than requiring periodic recharging, it runs continuously as long as it gets a constant supply of hydrogen gas and oxygen. 4. Electric welders are of the arc type and the resistance type. 5. The raceway in cellular concrete floor slabs is metal.
This is the most traditionally used welding method, which uses a flux-covered metal electrode to carry an electrical current forming an arc that melts the work and the electrode.
a. oxyacetylene welding b. shielded metal arc welding c. gas tungsten arc welding d. gas metal arc welding
The practice of soaking kernels in water as part of the wet milling process is known as ____________________
Fill in the blank(s) with correct word
It is not important to first obtain an understanding of the entire mechanical system.
Answer the following statement true (T) or false (F)