Answer the following statement(s) true (T) or false (F)
1. Components such as float switches and pressure switches will generally be located on tanks.
2. When making connections, wire numbers should be placed on the wire at any point of termination
3. The point-to-point method generally results in a saving of wire.
4. In the point-to-point method, the connections made inside the MCC are shown with solid lines.
5. Connecting components to a terminal strip is the more expensive method when it is necessary to troubleshoot the circuit.
1. True
2. True
3. True
4. False
5. False
You might also like to view...
For effective verbal communication, speakers should _____.
a. try to avoid using technical language b. speak as slowly as possible c. speak as rapidly as possible d. try not to vary their tone of voice
The fastest way to make a single short linear measurement is to use a(n) _____.
The yield strength of CFS members used for interior partitions is generally
A) 20 ksi. B) 30 ksi. C) 40 ksi. D) 50 ksi. E) none of the above.
Plot the power produced and heat rejection rate to a cool reservoir for a cyclic heat engine that receives 100 kW of heat from a warm reservoir, for thermal efficiencies ranging from 0.05 to 0.70.
Given: Q?H = 100 kW What will be an ideal response?