Which of the following is true about grooves?
A. There are six groove types.
B. The groove may not be cut with a saw.
C. The groove can only be made on one plate.
D. Joint strengths can be improved by making a groove preparation before the joint is welded.
Answer: D
You might also like to view...
A(n) ____ process uses a consumable alloy tube.
A. air carbon arc cutting B. oxygen lance cutting C. laser beam cutting D. laser beam welding
With about 80 percent of production, ___________ is the leading producer of catfish
a. Arkansas c. Mississippi b. Georgia d. Alabama
The brake assist system (BAS) uses the ABS computer, ________, and a solenoid to assist braking during a panic stop
A) Brake booster B) Brake pedal travel sensor C) Vacuum pressure sensor D) Both A and B
A customer complained that every time he turned on his vehicle's lights, the left side turn signal indicator light on the dash remained on. The most likely cause is ________
A) A poor ground to the parking light (or taillight) on the left side B) A poor ground to the parking light (or taillight) on the right side, causing current to flow to the left side lights C) A defective (open) parking light (or tail light) bulb on the left side D) Either A or C