Explain the terms arrow side and other side and indicate where the weld symbol is located on the reference line when using arrow side and other side.
What will be an ideal response?
When fillet and groove welds are used, the welding symbol leader arrows connect the
symbol reference line to one side of the joint known as the arrow side. The side opposite the location of the arrow is called the other side. If the weld is to be deposited on the arrow side of the joint, the proper weld symbol is placed below the reference line. If the weld is to be deposited on the side of the joint opposite the arrow, then the weld symbol is placed above the reference line.
You might also like to view...
One of the most common methods of dimensioning precision sheet metal prints, especially for the electronics industry, is:
a. chain dimensioning b. point-to-point dimensioning c. rectangular coordinate dimensioning without dimension lines d. precision dimensioning
In computer-controlled headlight systems, the headlight switch is usually a(n) ____ switch.
A. resistive multiplex B. high-side driver C. double-pole, single throw D. Multi contact
Accumulators are designed to _____
a. cool hydraulic fluid b. clean hydraulic fluid c. prevent pressure buildup in the system d. store fluid under pressure until the system needs it
If pedal height adjustment is needed, the first step is to:
A. turn the pushrod in or out as necessary. B. loosen the pushrod locknut. C. tighten the locknut. D. recheck the height.