Technician A says that fuel pressure regulators are often located on the return side of the fuel rail. Technician B says that the fuel pressure regulator is located at the fuel tank on vehicles using mechanical returnless systems. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
C
You might also like to view...
A rasp is a type of file with very, very ____________________ teeth
Fill in the blank(s) with the appropriate word(s).
The volume of a cone is given by 
, where r is the radius of the base and h is the height. Assume the height is measured to be h = 6.00 ± 0.01 cm and the radius is r = 5.00 ± 0.02 cm.
a. Estimate the volume of the cone, and find the uncertainty in the estimate. b. Which would provide a greater reduction in the uncertainty in V: reducing the uncertainty in h to 0.005 cm or reducing the uncertainty in r to 0.01 cm?
Servicing the base brakes on a hybrid vehicle requires the technician to _________
A) De-power and disconnect the HV battery B) Disconnect the brake regeneration cables C) Replace the pads when needed, just as on any other vehicle D) None of these
All of the following are acceptable methods of joining PE tubing except _____
A) chemical solvent B) heat fusion C) mechanical clamps D) compression collars