Uneven disc brake pad wear is being discussed. Technician A says the caliper piston may be stuck. Technician B says the caliper may be stuck on the slides and unable to "float." Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
C
You might also like to view...
Induction motors depend on the forces of attraction and ____________________ caused by the magnetic field pole polarities interacting between the stator and the rotor, to create a turning torque force on the rotor.
Fill in the blank(s) with the appropriate word(s).
To complete the fire triangle and produce fire, ____________________, ____________________, and
____________________ must be present.
Fill in the blank(s) with the appropriate word(s).(a) Draw the influence lines for the reactions at B and E, the shear between CD, the moment at B and D for the girder HG in Figure P12.18. (b) If the dead load of the floor system (stringers and slab) is approximated by a uniformly distributed load of 3 kips/ft, the reaction of the floor beam’s dead load to each panel point equals 1.5 kips, and the deadweight of the girder is 2.4 kips/ft, determine the moment in the girder at D and the shear just to the right of C.
The output pressure of a high-pressure oil pump used in residential oil-fired furnaces is:
A) 200 to 450 psi. B) 50 to 100 psi. C) Up to 1,000 psi. D) 100 to 200 psi.