The standard electrode extension for FCAW-S with 0.045" (1.1 mm) wire and an insulating nozzle is _____
a. 1/4" to 3/8" (6 to 9.5 mm)
b. 1/4" to 3/4" (6 to 19 mm)
c. 1/2" to 1-1/2" (13 to 38 mm)
d. 3/4" to 1-1/4" (19 to 32 mm)
d
You might also like to view...
To the extent possible, standards used for control purposes should be derived from
a. historical data. b. time-series data. c. external data. d. organizational goals. e. production indices.
Why can't impedances in series in an AC circuit simply be added to find the total circuit impedance?
A) Because the currents through inductive, capacitive, and resistance loads in an AC circuit are out of phase with each other. B) Because the total impedance is always lower than the lowest single impedance in a series circuit C) Because the impedance stays the same throughout a series circuit D) Because some of the impedance is lost through each load
Another name for a steering wheel position sensor is ________
A) Hand-wheel position sensor B) Yaw rate sensor C) Lateral acceleration sensor D) Any of the above
Suppose pistons A (diameter 1.25 inches) and B (diameter 0.75 inches) are connected by a simple hydraulic system. How much force does B exert if the input force on A is 3 pounds?
What will be an ideal response?