What is it called if both valves are closed at the same time and the gas has no place to go?
A. Interlock
B. Vibration
C. Deadheading
D. Loss of capacity
A. Incorrect. If both valves are closed at the same time, the gas has no place to go. This is referred to as deadheading.
B. Incorrect. If both valves are closed at the same time, the gas has no place to go. This is referred to as deadheading.
C. Correct. If both valves are closed at the same time, the gas has no place to go. This is referred to as deadheading.
D. Incorrect. If both valves are closed at the same time, the gas has no place to go. This is referred to as deadheading.
You might also like to view...
Most houses are designed for one specific family.
Answer the following statement true (T) or false (F)
When adjusting S-cam brakes on a trailer equipped with manual slack adjusters, which of the following must be true?
A. The tractor parking brakes must be applied B. The trailer service brakes must be applied C. The trailer parking brakes must be released D. The tractor service brakes must be released
Practical application: A one-lane bridge consists of a 10-in.-thick, 16-ft-wide reinforced concrete slab supported on two steel girders spaced 10 ft apart. The girders are 62-ft long and weigh 400 lb/ft. The bridge is to be designed for a uniform live load of 700 lb/ft acting over the entire length of the bridge. Determine the maximum reaction applied to an end support due to dead, live, and impact loads. The live load may be assumed to act along the centerline of the deck slab and divide equally between the two girders. Each concrete curb weighs 240 lb/ft and each rail 120 lb/ft. Stone concrete has a unit weight of 150 lb/ft 3 . Assume an impact factor of 1.33.
Casein is a protein found only in milk.
Answer the following statement true (T) or false (F)