The meter must be connected in ____ with the circuit when measuring current. When measuring voltage, the meter must always be connected in ____.

A. series, parallel
B. parallel, series
C. series-parallel, series
D. series-parallel, parallel


Answer: A

Trades & Technology

You might also like to view...

Stranded copper wire is used in most automotive electrical circuits because it ________

A) Bends more easily than solid wire B) Is an inexpensive but excellent conductor C) Both A and B D) Neither A nor B

Trades & Technology

In an air conditioner with a fixed metering device, a decrease in the outdoor ambient causes:

A) No appreciable change in either system capacity or superheat. B) Decreased system superheat. C) Increased system capacity. D) Increased system superheat.

Trades & Technology

The material to be used on the roof depends on:

A. pitch B. exterior style C. cost of the structure D. none of the above E. all of the above

Trades & Technology

What should be inspected as part of a visual inspection of the ignition system?

A) Spark plug wires for proper routing B) Spark plug gap C) Coil polarity D) All of the Above

Trades & Technology