Why does the CAC-A electrode holder have three holes in the head?

A) To prevent heat cracking of the unit (stress relief)
B) For cooling purposes
C) To allow compressed air flow
D) To allow pure oxygen flow
E) For reasons unknown


C

Trades & Technology

You might also like to view...

Every solar panel is a(n) ____.

a. electrical inverter b. electrical generator c. electrical cell d. electrical micro-inverter

Trades & Technology

The act of mating is called ____________________

Fill in the blank(s) with correct word

Trades & Technology

In the above figure, when the start button is pressed, the N.O. CR contacts ____________________ (open, close) and the current through the armature ___________________________________ (flows through the resistor, is supplied through the motor control circuitry).

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

For a temperature of about 68 °F, most people find a relative humidity _____ to be acceptable.

A. less than 30% B. between 30% and 70% C. at least 75% D. between 75% and 80%

Trades & Technology