Technician A says that SLA suspensions reduce tire scrub. Technician B says that solid rear axles are used with independent rear suspensions. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A
You might also like to view...
Explain the first step in the diagnosis of an electronically controlled shock absorber.
What will be an ideal response?
What is the difference between the sign-magnitude and 2's-complement systems of representing signed binary numbers?
A) In the 2's-complement system, all positive numbers are entered in the 2's-complement form preceded by "0" to indicate the sign and all negative numbers are entered in straight binary format preceded by a "1" to indicate the sign. The sign-magnitude system requires that positive and negative numbers be entered in straight binary form preceded by a "0" or "1" to indicate the proper sign. B) In the 2's complement system all numbers, regardless of signs, are entered in the 2's-complement preceded by a "1" or "0" to denote sign. In the sign-magnitude method, the magnitude bits represent the true binary value and the bit preceding the MSB represents the sign of the following bits. C) In the signed-magnitude system all numbers, regardless of their sign, are in straight binary format preceded by a "0" or "1" to denote the sign. In the 2's complement system, the negative numbers are entered in the 2's-complement form preceded by a "1" to acknowledge a negative number whereas positive numbers are entered in straight binary format preceded by a "0" to indicate the sign. D) In the sign-magnitude system all numbers, regardless of their sign, are in the 2's-complement form preceded by a "0" or "1" to indicate their sign. On the other hand, the 2's-complement system requires the sign-magnitude bits be in straight binary format preceded by a "0" or "1" to denote the proper sign.
A(n) ____________________ drill requires a 120-volt outlet to plug into.
Fill in the blank(s) with the appropriate word(s).
?Which time delay relay operating mode prevents contacts from moving until the specified delay period has elapsed from when the input signal is turned on?
A. ?delay-on-break B. ?delay-on-make C. ?interval timing D. ?repeat cycle