The device that pulls the electrode wire from a spool and pushes it through the gun cable and gun is known as a(n) _____

A) closed-loop unit B) wire feeder
C) spool gun D) push-pull extractor


B

Trades & Technology

You might also like to view...

If 1150 parts are produced in 6.25 hours, find the number of parts produced in 9.75 hours.

A. 1509 B. 1654 C. 1794 D. 1863

Trades & Technology

When does the service advisor recommend any other needed service?

A) After the customer's concerns are documented B) As soon as he/she can C) At the service write up desk D) None of the above

Trades & Technology

Technician A says that most gearing used in a typical truck transmission is torque reducing and speed increasing. Technician B says that when a standard transmission is in 1:1 ratio, the engine flywheel and the transmission tailshaft should rotate at the same speed. Who is correct?

A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B

Trades & Technology

Convert 0.86 into a fraction and reduce the answer to lowest terms

A) 86/100 B) 14/100 C) 43/50 D) 7/50

Trades & Technology