Generally, ____________________ are devices having a timing function after the timer coil has been energized or deenergized.
Fill in the blank(s) with the appropriate word(s).
time-delay relays
You might also like to view...
The fat content of fish is lower than that of red meat
Indicate whether the statement is true or false
Flare connections are used on mini-split systems to avoid oxidation in the lines and also to avoid heating and destroying the sensitive electronic expansion valves use in the outdoor units
Indicate whether the statement is true or false
What should the service technician do if a blown fuse is found in the unit disconnect switch during the preliminary inspection?
A) Replace the fuse with the same size and turn the disconnect switch back on. B) Replace the fuse with a size larger to prevent nuisance problems. C) Check all major loads for shorts and grounds. D) Replace the fuse with a copper pipe, turn the disconnect on, and check the wire to see if it is getting warm.
Technician A says Chrysler OBD-I (1981-1995 ) vehicles were equipped with a BUS system called Serial Communications Interface (SCI). Technician B says The Chrysler Programmable Controller Interface (PCI) is a three-wire communication protocol that connects at the OBD-II DLC at terminal 2. Who is right?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician