ASE-Style Multiple Choice
Which of the following is LEAST-Likely a component of a typical disc brake?
A. a grease cap
B. lug studs
C. a brake pad
D. an adapter
Answer: D
You might also like to view...
¿Cuál de los siguientes conductores tiene el mayor diámetro?
a. AWG n.° 1 b. AWG n.° 12 c. AWG n.° 3/0 d. 250 kcmil
Answer the following statement(s) true (T) or false (F)
1. For a transformer of 600 volts or less, overcurrent protection is permitted. 2. When load taps are made in the tie circuit between transformers, the current-carrying capacity shall not be more than a stipulated percentage (200%) of the rated secondary current of the largest capacity transformer connected to the secondary tie. 3. Transformers may be operated in parallel and protected as a unit if their electrical characteristics are similar. 4. Transformers are required to have a disconnecting means located in sight from the transformer or in a remote location if the transformer is a class 2 or class 3 transformer. 5. The fire hazard potential of oil-insulated transformers is greater than that of askarel-insulated transformers.
The linear EGR valve uses ________ to control the opening of the valve
A) Vacuum B) A pressure valve C) A pulse-width modulated solenoid D) None of these
Which of these is NOT a possible effect of using gasoline with alcohol additives?
A) Reduced CO emissions B) Increased volatility C) Increased octane D) All of these can result from using alcohol additives