The percent slope of the pipe between SDMH-6 and SDMH-5 is______.
Fill in the blank(s) with the appropriate word(s).
1.25%
You might also like to view...
Technician A says that a MAF sensor actually measures the density and amount of air flowing into the engine. Technician B says a that hot wire MAF sensor uses the electronics in the sensor itself to heat a wire 70°C above the temperature of the air entering the engine. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
In a regenerative braking system, which part of the electric motor is being controlled by the computer?
A) The rotor B) The stator C) Both the rotor and the stator D) Neither the rotor nor the stator
How is the limit wired on a furnace that uses a line voltage limit?
A) The limit is wired in series with the indoor fan motor. B) The limit is wired in series with the transformer primary. C) The limit is wired in series with the gas valve. D) The limit is wired in series with the transformer secondary.
Why was a color code developed so that the resistance can be determined easily from the color bands present on the resistor?
A. Because of the percentage of failure B. Because of the value of the resistor C. Because of resistance values D. Because of the small size