Determine the maximum permissible wall thickness of the steel sleeve shown in the accompanying figure. All dimensions are in millimeters.
What will be an ideal response?
Wall thickness = 26.20 + 0.05 - (20.50 - 0.01) = 5.76 mm
You might also like to view...
A receiver is tuned to 1 GHz transmission and receives signals with Doppler frequencies ranging from 10 Hz to 50 Hz when moving at a speed of 80 km/hr. What is the fading rate?
What will be an ideal response?
Which best describes the reason that a circuit breaker or fuse may interrupt electric current if someone is using too many household devices at the same time such as a hair dryer, microwave oven, and toaster?
A. The devices are all connected in series and each device that is switched on adds an additional series resistance. B. The devices are all connected in parallel and each device that is switched on decreases the total circuit resistance causing the total circuit current to increase. C. The circuit breaker or fuse has too small of a rating. D. The electric company limits the amount of current supplied to a house.
In a properly operating system, the evaporator temperature is about ________.
A) 25°F B) 35°F C) 30°F D) 32°F
In the operation of the 555 timer, the trigger, pin #____, must be connected to a voltage less than one-third of Vcc to trigger the unit.
a. 2 b. 3 c. 4 d. 5