After a disc brake pad replacement, the brake pedal went to the floor the first time the brake pedal was depressed. The most likely cause was ________
A) Lack of proper lubrication of the caliper slides B) Air in the lines
C) Improper disc brake pad installation D) Normal operation
D
You might also like to view...
A(n) ____________________ coefficient is the number factor of a term.
Fill in the blank(s) with the appropriate word(s).
The purpose of contactor 2M shown in Figure 3 is to _____.
a. short motor leads T4, T5, and T6 during starting to connect motor windings in a wye
configuration
b. energize motor leads T1, T2, and T3 for both wye and delta connections
c. energize motor leads T4, T5, and T6 during running to connect the motor windings in a
delta configuration
d. connect resistors in series with the motor windings during the transition from start to run
Technician A says that glow plugs are used to help start a diesel engine and are shut off as soon as the engine starts. Technician B says that the glow plugs are turned off as soon as a flame is detected in the combustion chamber. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
What is the theoretical line length for a roof with a slope triangle of 4/12?
A) 12.16" B) 13.42" C) 12.37" D) 12.64"