One yellow wire on the transformer secondary connects to the R terminal, the other yellow secondary wire connects to:
A) The contactor coil. B) The G terminal.
C) The C terminal. D) The indoor fan relay.
C
You might also like to view...
Electricians that work with three-phase power, motors, and motor control systems most likely work in _____.
a. apartment buildings b. office buildings c. industrial facilities d. residential construction
What are the two most common tooth sets for cutting wood?
What will be an ideal response?
An industry rule-of-thumb concerning airflow is that there should be what CFM of airflow per ton across the evaporator?
A) 1,000 B) 200 C) 400 D) 100
The designation "M10X1.5-6H" means ____.
A. that the thread is an ISO metric thread, the nominal major diameter in millimeters is 10, the thread pitch is 1.5, there is a medium tolerance of an external thread with no allowance B. that the thread is an ISO metric thread, the nominal major diameter in millimeters is 10, the thread pitch is 1.5, there is a medium tolerance of an internal thread with no allowance C. that the thread is an ISO metric thread, the nominal minor diameter in millimeters is 10, the thread pitch is 1.5, there is a medium tolerance of an internal thread with no allowance D. that the thread is an ISO metric thread, the actual major diameter in millimeters is 10, the thread pitch is 1.5, there is a medium tolerance of an internal thread with no allowance E. none of the above