The _____________ breeding method involves turning stallions into fields with mares and allowing mating to occur naturally

Fill in the blank(s) with correct word


pasture

Trades & Technology

You might also like to view...

The ____________________ aids in directing fluid flow from the turbine back to the impeller.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Technician A says cast aluminum parts are formed in a mold. Technician B says extruded parts may have multiple cells in the center of them. Who is correct?

A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B

Trades & Technology

A vehicle lacks power when accelerating from a stop. Technician A says this could be caused by chipped teeth on the pinion gears. Technician B says the torque converter's one-way stator clutch may be slipping. Who is correct?

A. Technician A B. Technician B C. Both Technicians A and B D. Neither Technician A nor B

Trades & Technology

An initially evacuated tank is to be filled with N2 gas from a supply line. The N2 gas in the supply line is at 20oC and 800 kPa. The volume of the tank is 0.5 m3, and the tank is to be filled until the pressure in the tank is 750 kPa. Determine the amount of N2 that flows into the tank, and the final temperature of the N2 in the tank, assuming that the tank is insulated.

State i: Inlet (Supply Line); State 1: Initial State; State 2: Final State Given: N2; Ti = 20oC; Pi = 800 kPa; V = 0.5 m3; P2 = 750 kPa; Assume: P1 = 0; m1 = 0 (initially evacuated); Q = 0 (insulated). Also, as no information is given and these terms are unlikely to be significant, W = 0, and kinetic and potential energy can be neglected. No flow out of the tank. N2 is an ideal gas with variable specific heats.

Trades & Technology