Most switches used for safety controls in HVAC circuits:

A) Are normally closed and wired in series with the load they protect.
B) Are normally open and wired in series with the load they protect.
C) Are normally open and wired in parallel with the load they protect.
D) Are normally closed and wired in parallel with the load they protect.


A

Trades & Technology

You might also like to view...

Where is the preferred work point location for welded bracing elements?

What will be an ideal response?

Trades & Technology

Refer to Exercise 7. Estimate F, and find the relative uncertainty in the estimate, assuming that g=9.80 exactly and that

a. d=0.20 m and l=35.0 m, both with negligible uncertainty, and h=4.51 ± 0.03 m. b. h=4.51 m and l=35.0 m, both with negligible uncertainty, and d=0.20 ± 0.008 m. c. d=0.20 m and h=4.51 m, both with negligible uncertainty, and l=35.00 ± 0.4m.

Trades & Technology

Another common name for lineman pliers is _____

a. locking pliers b. tongue-and-groove pliers c. needle-nose pliers d. side cutters

Trades & Technology

Cutting plane lines are labeled and the labels refer to the sectional view.

Answer the following statement true (T) or false (F)

Trades & Technology