What is the purpose of the expansion device located at the evaporator inlet?
A) Provide a restriction to create pressure in the refrigerant high side
B) Meters the correct amount of refrigerant flow into the evaporator
C) Both A and B
D) Neither A nor B
C
You might also like to view...
A feeder circuit with no motor load has a continuous load of 10A and a noncontinuous load of 10A. The feeder overcurrent protective device should be sized at _____.
a. 12.5A b. 20A c. 22.5A d. 27.25A
PCM reprogramming requires the use of a special battery charger
Indicate whether the statement is true or false
Two technicians are discussing a problem where the brake pedal travels too far before the vehicle starts to slow. Technician A says that the brakes may be out of adjustment. Technician B says that one circuit from the master cylinder may be leaking or defective. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
______________________________ are used to prevent rusting of metal parts.
Fill in the blank(s) with the appropriate word(s).