What type of reaction occurs when complete loads are done start to finish and then removed?
A) Batch reactions
B) Continuous reactions
C) Stirred reactions
D) Inconsistent reactions
Answer: A
Explanation: A) Correct. Batch reactions occur when complete loads are done start to finish and then removed.
B) Incorrect. Continuous reactions are an ongoing process with raw materials entering and product being removed from the reactor.
C) Incorrect. Batch reactions occur when complete loads are done start to finish and then removed.
D) Incorrect. Batch reactions occur when complete loads are done start to finish and then removed.
You might also like to view...
If a vehicle equipped with an electronic suspension control system is accelerating rapidly at wide open throttle, what mode does the system enter?
What will be an ideal response?
A(n) ____________________ membrane will allow certain substances to pass through, whereas others
cannot.
Fill in the blank(s) with the appropriate word(s).In Fig. 12.73, two wattmeters are properly connected to the unbalanced load supplied by a balanced source such that Vab = 208 ?0° V with positive phase sequence.
 figure 1.png)
Exhaust gas recirculation (EGR) is generally not needed under any of the following conditions EXCEPT ________
A) Cruise speed B) Wide open throttle (WOT) C) Idle speed D) Cold engine