The term seismic load refers to stress that results from _____.
A. strong prevailing winds
B. occupants of the structure
C. an earthquake
D. the weight of a car or truck
Answer: C
You might also like to view...
A half-wave, single-phase ac-to-dc converter is loaded by an impedance of l0 mH inductance in series with l0 ? resistance. The ac voltage is 110 v (rms). For ? equal to 30o and 90o , calculate the following:
a. Conduction period b. Average current of the load c. Average voltage of the load d. Power
Why should a technician never touch the glass ampoule of any halogen bulb?
A) The glass will crack B) Oils from a finger can cause a shorter service life C) The glass will melt from the heat of your finger D) You can get a significant burn
To correct for drift between the sending and receiving oscillators, asynchronous communication systems _______
A) use a third system oscillator to establish a reference frequency B) require periodic calibration by authorized service personnel C) coordinate transmissions with a recognized NIST time signal D) use the start bit of each data packet to resynchronize the oscillators
A 65 Vrms signal is applied to a 10 F capacitor. What is the total peak current?
A) 6.5 kA B) 153 mA C) 6.5 A D) not enough information