The backing plate should be replaced if the shoe contact areas (pads or ledges) are worn more than ________
A) 1/16 in. (2 mm) B) 1/8 in. (4 mm) C) 1/4 in. (7 mm) D) 1/2 in. (13 mm)
A
You might also like to view...
Students partaking in an FFA public-speaking career development event may choose from ____________________ different FFA public-speaking contests
Fill in the blank(s) with correct word
Rubber gloves should be worn whenever working on or near the high-voltage circuits or components of a hybrid electric vehicle. Technician says A that the rubber gloves should be rated at 1000 volts or higher. Technician B says that leather gloves should be worn over the high-voltage rubber gloves. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Which of these is a characteristic of disc brakes?
A) Make excellent parking brakes B) Typically do not stop as well as drum brakes C) Have self-adjusting ability D) Always work quietly
Two center lines are uslly drawn at
A. 45 degrees B. 90 degrees C. 30 degrees D. 180 degrees