What position is the throttle pedal in during regenerative braking?

A) About 10 % B) Fully lifted
C) The throttle is ignored D) None of these


B

Trades & Technology

You might also like to view...

____ are enclosed channels of metal or nonmetallic materials designed for holding wires or cables.

a. Conduits b. Pipes c. Raceways d. Hangers

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. In a few models, fan switches are operated by a bimetal strip that closes a set of contacts. 2. In one type of fan switch, the switch is used to control the speed of a fan motor as opposed to turning it on or off. 3. One type of limit switch is used as a safety cut-off switch for a cooling system. 4. Limit switches contain a normally closed contact. 5. The fan-limit switch contains both a fan switch and a high-limit switch in one housing

Trades & Technology

It is recommended that at least ____________________ a year, the probe should be removed from the water reservoir and cleaned.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Digital controllers take the change in the gain-error product from the last output calculation and add that to the last controller output for a new controller value

Indicate whether the statement is true or false

Trades & Technology