The intention of ID Credit 2 is to encourage and facilitate which processes of the project?
A) certification
B) application
C) registration
D) evaluation
E) education
F) A, B, and C
G) C, D, and E
Indicate whether the statement is true or false
F
You might also like to view...
A 6 15/16” long piece is cut from the piece of steel angle iron illustrated. If there is 1/8” of waste caused by the kerf of the oxy-acetylene cutting process, what is the length of the remaining piece of angle iron?
Reduce all fractions to their simplest forms. Convert all improper fractions to mixed numbers. Provide answers in the following format:
Fraction: 3/4
Mixed number: 1 5/8
A triangular-shaped piece of land is fenced in. Two sides of the property are 100.0 feet and 140.0 feet. The included angle between these two sides is 72°0'. What is the length of fencing required for the third side to the nearest hundredth foot?
Fill in the blank(s) with the appropriate word(s).
A defective taillight or front park light bulb could cause _______
A) The turn signal indicator on the dash to light when the lights are turned on B) The lights-on chime to sound if the brake pedal is depressed C) The dash lights to come on when the brake lights are on D) All of the above
A trench 4 feet deep and 122 yards long is dug to contain several conduits. The trench is to contain 3 runs of 2" conduit, 2 runs of 1" conduit, and 1 run of 4" conduit. Each conduit must protrude out of the ground a minimum of 1 foot at each end. Each conduit section is 10 feet long. How many sections of 2" will be needed?
Fill in the blank(s) with the appropriate word(s).