When using keyway broaches in an arbor press, you should avoid:
A) Lack of lubrication of the broach and using the broach on hard materials
B) Using an ill fitting guide bushing and having less than two broach teeth contacting the workpiece
C) Loose press rams and a lack of clearance for the broach through the press plate
D) All of the above
D
You might also like to view...
A momentary-contact normally-open switch would likely be used to control which type of device?
A. Horn B. Tail lamps C. Interior lamp D. Blower motor
Certain tasks are performed by the engine control module (ECM) in order to ensure that the exhaust emissions are within 1.5 times the Federal Test Procedure (FTP) limits. The ECM can perform all of these actions except ________.
Fill in the blank(s) with correct word.
The political controversy surrounding the Wade-Davis Bill and the readmission of the Confederate states to the Union demonstrated
A. the deep differences between President Lincoln and Congress concerning the political conditions and terms of Reconstruction. B. the close ties that were developing between President Lincoln and the Democrats over Reconstruction issues. C. President Lincoln's desire for a harsh Reconstruction plan. D. that a Congressional majority believed that the South had never legally left the Union. E. the Republicans' division about whether readmitting the Confederate states to the Union was wise, regardless of the stringent readmission conditions specified in the Wade-Davis legislation.
Which temperature adaptation type would wheat be categorized as?
a. polar c. tropical b. temperate d. subtropical