As opposed to true power, the figure obtained by multiplying the source voltage and current is known as ____________________.
Fill in the blank(s) with the appropriate word(s).
apparent power
You might also like to view...
Find, in inches, the length of 1/2” plate needed to form this semicircular ventilation section. The inside radius is 10 1/2”.
An initially evacuated tank is to be filled with N2 gas from a supply line. The N2 gas in the supply line is at 20oC and 800 kPa. The volume of the tank is 0.5 m3, and the tank is to be filled until the pressure in the tank is 750 kPa. Determine the amount of N2 that flows into the tank, and the final temperature of the N2 in the tank, assuming that the tank is insulated.
State i: Inlet (Supply Line); State 1: Initial State; State 2: Final State Given: N2; Ti = 20oC; Pi = 800 kPa; V = 0.5 m3; P2 = 750 kPa; Assume: P1 = 0; m1 = 0 (initially evacuated); Q = 0 (insulated). Also, as no information is given and these terms are unlikely to be significant, W = 0, and kinetic and potential energy can be neglected. No flow out of the tank. N2 is an ideal gas with variable specific heats.
In a closed bid system, the number of companies invited to bid is typically limited to no more than ten contractors who are known to the owner or designers and who meet the qualification criteria set by the owner.
Answer the following statement true (T) or false (F)
The term _____ refers to the principle of imagining a line dividing a page either vertically or horizontally and then placing visual elements so they achieve symmetrical or asymmetrical harmony
Fill in the blank(s) with correct word