Booster pushrod adjustment is usually checked with a gauge, which measures from the end of the pushrod to the booster shell. Two basic gauge designs are used:____________________ and ____________________.
Fill in the blank(s) with the appropriate word(s).
Delco-Moraine (Delphi Chassis)
You might also like to view...
Use the graphic scale shown on the map of the State of Texas in Figure R3–1 to approximate the distance between the following locations using the most direct route.
1. Laredo to Cotulla. 2. Beaumont to Houston. 3. Dallas to the State of Louisiana. 4. Lake Meredith to Lubbock. 5. Baffin Bay to San Antonio.
Experience has shown that a worker is more likely to be injured:
A. During the first day on the job B. During the first year of employment C. During the second to fourth year of employment D. During the year before retirement
State building codes allow local governments to adopt a local building code, but they require that the local code ____.
A. only deals with natural disasters B. only deals with residential structures C. be at least as stringent as the state code D. be more permissive than the state code
Radiant heat is transferred by ____.
A. ultraviolet rays B. infrared rays C. ionization D. refraction