What needs to be removed before the valves can be removed from the cylinder head?
A) The valve keepers B) The camshaft, if OHV engine
C) The cylinder head from the block D) Both A and C
A
You might also like to view...
A(n) ____________________ is a hex tool used to turn setscrews and capscrews.
Fill in the blank(s) with the appropriate word(s).
Using the series circuit in question #4, determine the current provided by the battery to the resistors.
What will be an ideal response?
The air temperature of the air off an evaporative cooler is ____.
A. warmer than the entering air B. cooler than the entering air C. the same as the entering air D. made up of sensible heat only
What should the service technician do if a blown fuse is found in the unit disconnect switch during the preliminary inspection?
A) Check all major loads for shorts and grounds. B) Replace the fuse with one a size larger to prevent nuisance problems. C) Replace the fuse with one of the same size and turn the disconnect switch back on. D) Replace the fuse with a copper pipe, turn the disconnect on, and check the wire to see if it is getting warm.