Fuses and ____________________ are designed to protect the circuit from a direct ground or short-circuit condition.
Fill in the blank(s) with the appropriate word(s).
circuit breakers
You might also like to view...
When a cable or rope is compressed by a force, what is the compressive stress in it?
A) Infinite B) Equal to the force applied C) Force divided by the cross-sectional area of rope D) Zero E) None of the above
A "chirping" noise is heard while the vehicle is moving forward, but stops when the brakes are applied. Technician A says that the noise is likely caused by the disc brake pad wear sensors. Technician B says the noise is likely a wheel bearing because the noise stops when the brakes are applied. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Technician A says that when extending a tempered frame rail, the extension channel does not have to be tempered so long it is at the rear of the truck. Technician B says that when extending a tempered frame rail, either a 45- or 60-degree cut-angle is recommended to avoid a sudden change in RBM over a given vertical section. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
What temperature scale uses 0° as the freezing point of water and 100° as the boiling point of water?
A) Celsius B) Rankine C) Fahrenheit D) Kelvin