Pump-402 feed water pump ‘s discharge pressure is:

a. 35 psig
b. 155 psig
c. 120 psig
d. 60 psig


Answer: B

Trades & Technology

You might also like to view...

Repeat Problem P14.19, for a lake of size 250m length × 50 m width × 5 m deep, if biosensors are to be installed to monitor pollutant level and if the range of each sensor is 0.5 m.

Trades & Technology

Se corta una lengüeta de revestimiento de tope de ___ pulgadas (____cm) sobre el aislamiento del conducto para engraparlo

a. 2 b. 5 c. 6 d. 8

Trades & Technology

Technician A says that brake drums on the same axle should be close to the same inside diameter for best brake balance. Technician B says that a brake drum may be cracked if it rings like a bell when tapped with a light steel hammer. Which technician is correct?

A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technician A nor B

Trades & Technology

If a surface is perpendicular in only one of the three views, it is referred to as a(n) ____.

A. inclined surface B. sloped surface C. inclined sloped surface D. pristine surface

Trades & Technology