AT-1 is primarily designed to detect:
a. Pentane
b. Propane
c. Butane
d. Heptane
Answer: C
You might also like to view...
Describe the weld(s) required to join A6 to A2.
Review drawing number 523838C0A and then answer the question.
A pressure cooker is filled with 2.0 kg of liquid water at 30oC. Heat is added to the system, and the relief valve releases saturated water vapor when the pressure reaches 150 kPa. Model the system, and then use the model to plot the amount of heat transfer that occurs as the mass of the water present in the pressure cooker ranges from 1.95 kg to 1.00 kg
State e: outlet state; State 1: Initial State; State 2: Final State. Given: H2O; m1 = 2.0 kg; T1 = 30oC; P2 = Pe = 150 kPa; xe = 1.0 Assume: As no information is given and these terms are unlikely to be significant, W = 0, and kinetic and potential energy can be neglected. No flow into the system. V = constant. What will be an ideal response?
Conductor sizes are expressed in American Wire Gage (AWG) or in ____.
A. circular mils B. copper gauge units C. diameter in inches D. millimeters squared
What is an example of a salvage material commonly used in buildings?
A. bricks B. laminated beams C. natural stone shingles D. PVC pipe