How much force is generally used to check idler arms?
A) As much as possible B) 5 lbs.
C) 150 lbs. D) 25 lbs.
D
You might also like to view...
You built a retaining wall 15 feet long and 5 stones high, using stones 15 inches wide, 6 inches high, and 10 inches deep. You first needed a footer 12 inches wide with 4 inches of crushed stone in the bottom. You added 1.5 inches of stone dust, then a row of stone with the top level with the ground.
a. How deep is the footer? b. How many cubic feet of dirt were removed? c. How many cubic feet of crushed stone were used? d. How many cubic feet of stone dust were used? e. How many stones were used in the footer? f. What is the height of the wall in feet? g. How many stones are in the wall above ground?
Technician A says the output gear will rotate in the opposite direction to the input gear when an external gear drives another external gear. Technician B says the output gear will rotate in the same direction as the input gear when an external gear drives another external gear. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
When applying the order of operations for solving problems involving combined operations, after completing all work in parentheses the next step is to perform any addition and subtraction.
Answer the following statement true (T) or false (F)
The __________ method of leak detection is primarily used on systems that have already been put into service,
A. electronic leak detector B. halide leak detector C. ultrasonic leak detector D. ultraviolet leak detector