A torque converter's turbine end-play has measured to be 0.070 in (1.5 mm). What action should the technician take?

A) Use longer flexplate bolts
B) Nothing, the clearance is OK
C) Replace or rebuild the torque converter
D) Replace the flexplate shims with thicker shims


C) Replace or rebuild the torque converter

Trades & Technology

You might also like to view...

9. Many transistor controlled variable frequency drives now employ a special type of transistor called a(n) ______________________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. Regardless of material boundary indicates that a datum feature simulator is adjustable (or movable) from MMB toward LMB until it makes maximum contact with the extremities of the datum feature(s). 2. Per Rule #2, MMB is the default condition referenced by a size datum feature. 3. Datum feature selection and datum feature reference are directly related to how a part functions in its assembly. 4. Where a feature of size is referenced at RMB, three conditions exist. 5. In the case where a surface is the primary datum feature, a diameter is the secondary datum feature at RMB, and a width is the tertiary datum feature at RMB, the datum reference frame consists of a plane and an axis with two planes passing through it.

Trades & Technology

Which of the following is an example of a physical change?

A) Smell B) Gas bubbles C) Release of heat D) Creation of new substance

Trades & Technology

In an electronic air cleaner, the smallest particles in the air are trapped in the _____

a. pre-filter b. ionizer section c. collector section d. charcoal filter

Trades & Technology