Why is it dangerous to drill out orifices in metering devices?
A) The metal is too soft to drill through. B) The orifices are conical in shape.
C) The metal is too hard to drill through. D) The orifices are rectangular in shape.
B
You might also like to view...
The bit-wise (bit-by-bit) ExOR of a=1010 and b=1011 equals __________
Fill in the blank(s) with the appropriate word(s).
Most large swine producers have used gestation crates since the 1990s as the primary housing for
gestating sows
Indicate whether the statement is true or false.All of the following are precautions to prevent static electricity damage when replacing a control module EXCEPT:
A. Ground the package to a known good ground before opening. B. Open the package only when ready to install the component. C. Wipe the terminals clean before installing the component. D. Touch a known good ground before opening the package.
During the vapor recovery phase, what is pumped from the condenser to the storage tank?
A) High-pressure vapor B) Liquid refrigerant C) Low-pressure vapor D) Cooling water