In the SLC 500, math registers S:13 and S:14 are used as the source for the FRD instruction. Which of the following is correct?
A) S:14 contains the most significant digits.
B) S:13 contains the most significant digits.
C) Either A or B.
D) S:13 and S:14 are not used in the FRD instruction.
A
You might also like to view...
Which raw materials are used in the manufacturing of Portland cement (PC)?
What will be an ideal response?
Technician A says that biodiesel has a short shelf life compared with petroleum sourced diesel fuel. Technician B says that degraded biodiesel can result in costly fuel problems. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
What three distances build up the total stopping distance of your truck or bus?
a. Attendance distance, reaction distance, and slowing distance. b. Perception distance, reaction distance , and braking distance. c. Respond distance, observation distance, and braking distance.
Draw an objective tree for the following:
If you drive in the state of Florida, you may notice some traffic congestion when crews trim trees on the state roads and freeways. Assume that the Florida Department of Transportation is the client. Usually, branches 6 inches or less in diameter are trimmed. The allowable horizontal distance from the edge of the road to the branches is 6 ft. The material removed from the trees must be collected and removed from the roadside. To reduce the cost of trimming, a maximum of only two workers can be assigned for each machine. The overall cost, which includes equipment and labor must be reduced by at least 25% from present cost. The state claims that the demand for your machines will follow the price reduction—that is, if you are able to reduce the cost by 40%, the demand will increase by 40%. Allowable working hours depend on the daylight and weather conditions.