Answer the following statement(s) true (T) or false (F)
1. The three switches on top of the 1756-EN2T module can be modified before or after installing the module in a chassis.
2. When a ControlLogix module with an integrated USB port is being used for the first time with a particular computer, the required USB drivers must be configured.
3. Typically, the personal computer USB driver configuration only has to be completed once.
4. When a new device is connected to a personal computer, the Found New Hardware Wizard can assist with installing driver software automatically.
5. If the switches of the 1756-EN2T are set for a specific address, this IP address can be changed in the module’s configuration window in RSLinx.
6. With the RSLinx driver configured, a RSLogix 5000 project can be downloaded from the personal computer to the ControlLogix controller by way of the 1756-EN2T’s USB port.
7. To download an RSLogix project to a ControlLogix controller, the project must be saved and closed.
8. If you have a personal computer with no standard serial port but with USB ports, and a ControlLogix controller with a traditional 9-pin D-shell serial port, direct serial communication between the personal computer and the ControlLogix controller will be very easy.
1. False
2. True
3. True
4. True
5. False
6. True
7. False
8. False
You might also like to view...
Which OSI model layer handles the conversion of outgoing data from bits that computers use in the signals that networks use?
A. Data Link B. Physical C. Network D. Presentation
Programming languages can recognize the end of data in a file automatically, through a(n) ____ code that is stored at the end of the data.
A. diamond B. exit C. eof D. end
The ________ attribute is the frame attribute that specifies the content that will display in the frame
A) name B) target C) base D) src
The FTP client can use any port numbers greater than ____________________.
Fill in the blank(s) with the appropriate word(s).