?
The tread wear indicator bar becomes visible when tread depth is less than?

A. 2/32 inch
B. 2/16 inch
C. 4/32 inch
D. 4/16 inch


Answer: A

Trades & Technology

You might also like to view...

Pinion depth is usually adjusted by ________.

A) Tightening the side bearing cap bolts B) Changing the thickness of a shim under the pinion bearing C) Using a case spreader D) Adjusting the position of the ring gear

Trades & Technology

When removing the transmission pan, loosen all of pan bolts except those at ________

A) One end, then loosen these slowly to lower the pan B) Both ends C) The corners D) In the center of each side

Trades & Technology

The start capacitor is ________

A) connected in series with the start winding of a shaded pole motor B) connected in series with the run winding of a PSC motor C) connected in series with the start winding of a CSIR motor

Trades & Technology

Newer, high efficiency air conditioning systems operate with __________ condenser saturation temperatures and pressures than older, standard efficiency systems.

A. higher B. lower

Trades & Technology