The mechanical engineer's scale typically has full-scale divisions that are divided into 1/16, 10, and 50.

Answer the following statement true (T) or false (F)


True

Trades & Technology

You might also like to view...

What is the weld length required as specified in the welding symbol shown in Figure 1?

a. 3 b. 6 c. 1?4 d. The entire length of the joint e. None of the above

Trades & Technology

William built an open shelter for his cattle in the feedlot. The shelter is 32 feet wide and 180feet long with a feed trough in the center running the length of the shelter. He put a two-way roof with a 25° slope. He used 3-foot-wide sheet metal for the roof.

a. How many square feet are under the roof? b. How high does the roof rise? c. What length piece of sheet metal was needed to reach from the ridge cap to the eave? d. How many sheets of metal were purchased?

Trades & Technology

The spring-loaded tensioners used with ____________________ belts have a belt length variation gauge.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

The space between two gear teeth in contact is called:

A. runout B. backlash C. Both A and B D. Neither A nor B

Trades & Technology