On a vehicle with computer-controlled starting, some key-operated ignition systems, and most push-button-to-start systems use the PCM to crank the engine. The ignition switch start position or the push-to-start button is used as a(an) ________ signal to the PCM

A) Relay B) Control C) Input D) Output


C

Trades & Technology

You might also like to view...

A ____ foundation system uses beams placed between vertical supports to support structural loads.

A. stacked B. piling C. spread D. continuous

Trades & Technology

When the clutch is released (clutch pedal down) ________.

A) The pilot bearing is pressed toward the engine B) Springs force the pressure ring toward the flywheel C) The release (throwout) bearing is used to move the pressure ring toward the clutch cover D) Springs force the pressure ring toward the clutch cover

Trades & Technology

Which of these wrenches is recommended for loosening air conditioning refrigerant lines?

A) Box end wrench B) Open end wrench C) Combination wrench D) Flare-nut wrench

Trades & Technology

If a 1157 bulb were installed in a left front parking light socket instead of a 2057 bulb, what would be the most likely result?

A) Left turn signal would flash faster B) Left parking light would be slightly brighter C) Left parking light would be slightly dimmer D) Left turn signal would flash slower

Trades & Technology