Heat can be transferred from a refrigerant to the outdoors on a hot day because the _____.
a. refrigerant is cooler than the outdoor air
b. refrigerant is warmer than the outdoor air
c. refrigerant and the air are at the same temperature
d. condenser is colder than the evaporator
b. refrigerant is warmer than the outdoor air
You might also like to view...
When normal surfaces are parallel to the side view, they are referred to as ____________________ surfaces.
Fill in the blank(s) with the appropriate word(s).
What is the maximum pressure that should be used with compressed air nozzles?
A) 120 PSI B) 45 PSI C) 30 PSI D) 90 PSI
What is the typical hole size for the latch assembly in the edge of the door?
A) 7/8" B) 1 7/8" C) 1 3/8" D) 5/8"
The three major parts that an electronic control system can be divided into are ________, ________, and ________.
A. Inputs, Outputs, Power B. Actuators, TCM, Ground C. Sensors, TCM, Conductors D. Sensors, Actuators, ECM