How must MR1 and MR2 be connected before a 7490, 7492, or 7493 counter can function?
A) MR1 or MR2 must be LOW. B) MR1 must be LOW, MR2 must be HIGH.
C) MR1 and MR2 must be HIGH. D) MR1 must be HIGH, MR2 must be LOW.
A
You might also like to view...
Which of the following statements is LEAST-Likely true?
A. If tires are to be replaced, the new tires should be installed before attempting an alignment. B. When correcting for road crown, camber creates less of a pull than caster. C. Caster causes the camber angle of the wheel to change during a turn. D. Roads are crowned (higher at the center than the outside) so that rain will run off.
A circle (sometimes a semicircle) is the symbol used to represent pumps or motors in hydraulic schematics.
Answer the following statement true (T) or false (F)
When going through the disciplinary process it is important that the manager is careful not to _______
A) Start the disciplinary process too soon B) Let them see you sweat C) Skip any steps in the disciplinary process D) None of the above
You have 5,814 meters of rope that you need to cut into 27 meter sections. How many 27 meter sections of rope
will you be able to create, and how much rope will be left over as waste? a. 215 sections with 3 meters left over b. 215 sections with 8 meters left over c. 215 sections with 9 meters left over d. 218 sections with 3 meters left over