What are the two ways bimetal thermostats have of making a good connection when the thermostat closes?
What will be an ideal response?
This is accomplished in two ways, a small magnet placed in the position to make the contacts close firmly and by using mercury in a bulb causing the bulb to move to a position where the mercury makes a good electrical connection.
You might also like to view...
____ by definition is anything that can be stored electronically.
A. Hardware B. Storage C. Software D. Objects
The charge cycle shown in Figure P2.10 is an example of a two-rate charge. The current is held constant at 70 mA for 1 h. Then it is switched to 60 mA for the next 1 h. Find: a. The total charge transferred to the battery. b. The total energy transferred to the battery. Hint: Recall that energy w is the integral of power, or P = dw/dt.
Let
What will be an ideal response?
Which one of the following would not be a proper method of using a metal pusher:
What will be an ideal response?
A ________ is a simple spacing tool used to check siding exposure
A) Gauge block B) Snaplock punch C) Batten D) Starter strip