?A block from an early 1970s car has 0.012" of bore taper. Technician A says to rebore oversize and use a new piston and rings. Technician B says to use 0.010" oversized rings. Who is right?

A. ?Technician A only
B. ?Technician B only
C. ?Both A and B
D. ?Neither A nor B


Answer: A

Trades & Technology

You might also like to view...

What is considered to be the first heat engine?

A. reciprocating steam engine B. rocket engine C. water turbine D. reaction turbine

Trades & Technology

A 3,250 sq ft house with 8 foot ceilings has 3 return ducts. What size must the ducts be to handle 7 exchanges per hour with a flow of 350 ft/min?  Round the answer to the nearer hundredth square foot.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

In an orthographic projection, if the box is unfolded, the images projected onto its sides will be on a ____.

A. single plane B. pair of planes C. sphere D. plane and two circles

Trades & Technology

What can be done to prevent air from getting trapped in the cooling system when the coolant is replaced?

A) Pour the coolant into the radiator slowly. B) Use a coolant exchange machine that draws a vacuum on the system. C) Open the air bleeder valves while adding coolant. D) Either B or C

Trades & Technology