Which of the following terms describes a drawing or chart of an electrical circuit using lines and symbols to represent current paths and components?
A) Electrical map B) Color code chart C) Schematic D) Wire chart
C
You might also like to view...
Bricks can be placed in one horizontal position to form a wall.
Answer the following statement true (T) or false (F)
Circuit networks can be simplified down to an equivalent circuit, with a single voltage source and series resistor. This conversion is done in accordance with _____.
A. Thevenin's theorem B. Norton's theorem C. the superposition theorem D. Kirchhoff's laws
Why is pH level important in soil?
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. All bathtubs shall have at least 1 1/2 inch waste and overflow. 2. Local health departments commonly have different or more restrictive requirements than national plumbing codes. 3. Water closet compartments shall be no fewer than 60 inches wide and 30 inches in length. 4. All sinks have a minimum drain size requirement of 1 1/2 inches and require a strainer or cross piece to catch or retain waste products. 5. Water temperature concerns regarding bidets have recently been addressed by codes mandating an ASSE 1070 device set to a maximum temperature of 135ºF.