The architectural design of PCC walls (exterior surface finish including any relief, color, aesthetic joints, etc.) is done by the architect in consultation with the precaster. The structural design of PCC walls is done by the precaster with information provided by the project's structural engineer. Name two important items of information that the precaster needs from the structural engineer.
What will be an ideal response?
1. Design lateral loads (wind and earthquake).
2. Type of structural frame (steel or concrete) with column grid and spacings.
You might also like to view...
When using 6d nails to install 1/2" plywood as a closed soffit, nail spacing for the edges should be 6" and the field spacing should be _____.
a. 3" b. 6" c. 9" d. 12"
When used for GTAW on aluminum pipe, a push angle provides base-metal cleaning is provided _____
a. by the action of the electrode b. by the action of the flux c. due to increased arc length and the DC voltage d. on the positive portion of the AC voltage cycle
Which one of the following address modes is NOT available on PLC 5 and SLC 500 PLCs?
A) Direct B) Arrays C) Indirect D) Indexed
In a period of a month, one driver uses 56 gallons of gasoline while another driver uses 22 gallons. How many more gallons of gasoline does the first driver use than the second?
A. 30 B. 31 C. 32 D. 34